9. SPECIFICATIONS

 

LCD Panel

61 cm (24.1 inch), TFT color LCD panel with Anti-Glare, Viewing Angle: Horizontal: 178°, Vertical: 178° CR ≥ 10

Dot Pitch

0.270 mm

Horizontal Scan Frequency

Analog

24 ~ 94 kHz (Automatic)

Digital 31 ~ 76 kHz

Vertical Scan Frequency

Analog

49 ~ 86 Hz (Automatic)
(1600 x 1200: 49 ~ 76 Hz / 1920 x 1200: 49 ~ 61 Hz)

Digital 59 ~ 61 Hz (VGA TEXT: 69 ~ 71 Hz)

Resolution

1920 dots x 1200 lines

Dot Clock (Max.)

Analog

202.5 MHz

Digital 162 MHz

Display Colors

16.77 million colors (max)

Display Area

518.4 mm (H) x 324.0 mm (V) (20.4" (H) x 12.8" (V))

Power Supply

100-120/200-240 VAC±10%, 50/60 Hz, 1.1 A/0.55A (with USB)

Power Consumption

Max.: 110 W (with USB)
Max (Normal): 100W (without USB)
Power Saving Mode: Less than 2 W (for single signal input without USB)

Input Connector

DVI-I x 2

Analog Input Signal (Sync)

a) Separate, TTL, Positive/Negative

b) Composite, TTL, Positive/Negative

Analog Input Signal (Video)

0.7 Vp-p / 75 ohms, Positive

Input Signal (Digital)

TMDS (Single Link)

Signal registration

Analog

45 (Factory preset: 30)

Digital 10 (Factory preset: 0)

Plug & Play

VESA DDC 2B

Dimensions

with stand

566 mm (W) x 358.7~ 480 mm (H) x 230 mm (D)
(22.3"(W) x 14.1" ~ 18.9" (H) x 9.1"(D))

without stand

566mm (W) x 396 mm (H) x 85 mm (D)
(22.3"(W) x 15.6"(H) x 3.35"(D))

Weight

with stand

10.2 kg (22.5 lbs.)

without stand

7.8 kg (17.2 lbs.)

Temperature

Operating: 0°C ~ 35°C (32°F ~ 95°F)
Storage: -20°C ~ 60°C (-4°F ~ 140°F)
Humidity 30% to 80% R.H. Non-condensing

USB

standard

Rev. 2.0 complied self-powered hub

USB port

Upstream port x 1
Downstream port x 2

Communication Speed

480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)

Power Supply

Downstream: 500 mA for each (max.)

Default settings

 

Brightness

100%

Smoothing

3

FineContrast Mode

Custom

PowerManager

Analog input : VESA DPMS
Digital input: DVI DMPM

Screen Size

Full

Input Priority

1

Off Timer

Disable

Menu Settings

Menu Size: Normal, Menu Off Timer: 45 seconds

Beep

On

Language

English

Beeper settings

Short beep

ScreenManager item selected.

ScreenManager parameter adjusted to minimum or maximum limit.

Input Signal Selection Button pressed.

Long beep

Auto Adjustment Button pressed.

ScreenManager data-save executed.

4 short beeps

Monitor not connected correctly.

PC turned off.

Monitor received unsupported signal frequency.

2 short beeps every 15 sec.

Monitor is in the advance notice mode of the Off Timer.
The power will be off within fifteen minutes.

Dimensions

 

Pin Assignment

DVI-I Connector

 

 

Pin No.

Signal

 

Signal

Pin No.

Signal

1

TMDS Data2-

11

TMDS Data1/3 Shield

21

NC

2

TMDS Data2+

12

NC

22

TMDS Clock shield

3

TMDS Data2/4 Shield

13

NC

23

TMDS Clock+

4

NC*

14

+5V Power

24

TMDS Clock-

5

NC

15

Ground (return for +5V, Hsync and Vsync)

C1

Analog Red

6

DDC Clock (SCL)

16

Hot Plug Detect

C2

Analog Green

7

DDC Data (SDA)

17

TMDS Data0-

C3

Analog Blue

8

Analog Vertical Sync

18

TMDS Data0+

C4

Analog Horizontal Sync

9

TMDS Data1-

19

TMDS Data0/5 Shield

C5

Analog Ground
(analog R, G, & B return)

10

TMDS Data1+

20

NC

 

 

 

 

 

(*NC: No Connection)

USB Port

 

Upstream Downstream
Series B
Connector
Series A
Connector

No.

Signal

Signal

1

VCC

Cable power

2

- Data

Serial Data

3

+ Data

Serial Data

4

Ground

Cable Ground