ScreenManager allows you to adjust screen performance though the main menu and select a FineContrast mode easily.
Press the Enter button once to display the main menu of the ScreenManager.
2. Making Adjustments and Settings
FineContrast Menu |
The following table shows all the ScreenManager's adjustment and setting menus.
"*" indicates adjustments of analog input only and "**" indicates digital input only.
Color |
||||
Select the Priority Input Signal. |
||||
Set the monitor's Off Timer to on or off. |
||||
Set the monitor's beeper to on or off. (Beeper settings.) |
||||
Set the menu displaying time.* 2 |
||||
Change the orientation of the ScreenManager for monitor's portrait position. |
||||
Make non-light for blue lighting when the screen is displayed. (Power Indicator Setting.) |
||||
Return to the factory Default settings. |
||||
Review the ScreenManager's settings, model name, serial number and usage time.* 3 |
||||
English, German, French, Spanish, Italian, Swedish and Japanese |
*1 The adjustable functions on the <Color> menu depend on the selected FineContrast mode. The above table shows the sub menus when the "Custom" mode is selected (See "4-3. Color Adjustment.").
*2 The displaying time of the FineContrast Menu cannot be changed.
*3 Due to the inspection on the factory, the usage time may not "0 hour" at shipping.
This function allows you to select the best suited mode for screen display.
Directly pressing the left or right button allows you to select the best suited mode for screen display from 5 FineContrast modes; Custom, Movie, Picture, Text and sRGB. Color settings each mode can be adjusted by using the <Color> menu of the ScreenManager.
Press the Enter button to exit the menu.
Selectable FineContrast modes are as follows.
To display the screen images based on those original colors (ex. over the Internet) |
<Brightness>, <Temperature> and <Gamma> settings can be adjusted on the FineContrast Menu. Select the desired function icon with the Up/Down control buttons and adjust with the Left/Right buttons. (Setting(s) of <Temperature> and/or <Gamma> is defined as standard default in some modes. ( "4-3. Color Adjustment.")
The detailed color settings of each mode can be adjusted by using the <Color> menu of the ScreenManager. ("4-3. Color Adjustment.")
Use the "Adjustment Lock" function to prevent any accidental changes.
The off timer function causes the monitor to automatically enter a power off state after a predetermined amount of time has lapsed. This function was created to reduce Afterimage characteristics that are particular to LCD monitors when the monitor screen is left on for a long period without use.
Advance Notice* 1 |
||
*1 Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor automatically enters the "Power Off" mode. To delay entering the "Power Off" mode, press the Power button during the advance notice period. The monitor will continue to
operate for an additional 90 minutes.
Press the Power button to return to a normal screen.
Light off the power indicator. This function is available for the multiple panels settings.
When switching on the Power button on the control panel, the EIZO logo is displyed for a while. If you desire to display or undisplay this logo, use this function. (Default is logo appearing.)
Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the power back on.
Turn off the monitor's power by the Power button, then hold down the Enter button once again and turn the power back on.