Reference
Using the USB Hub Function
This monitor is equipped with a USB hub. By connecting via USB, peripheral devices that support USB can be used, and smartphones can be charged.
When using the USB-C connector of a PC
Check that the displayed input signal "USB Selection" is set to "USB-1 (USB-C)" (see USB Selection – HDMI / DisplayPort / USB-C).
When using the USB-A connector of a PC
Check that the displayed input signal "USB Selection" is set to "USB-2" (USB Selection – HDMI / DisplayPort / USB-C).
Attention
- This function may not work depending on the external device you are using, your OS, and your peripheral devices. Contact the manufacturer of each device for information about USB compatibility.
- Even when the monitor is in power saving mode, devices connected to the USB downstream port are operational. For this reason, the power consumption of the monitor varies depending on the connected devices, even in power saving mode.
- When the main power switch of the monitor is off, a device connected to the USB downstream port will not operate.
- When Compatibility Mode is set to "Off" and the power of the monitor is turned off, a device connected to the USB downstream port will not operate.
Note
- This product supports USB 5Gbps. When connecting to peripheral devices that support USB 5Gbps, high-speed data communication is possible. (Only when the USB cable used to connect to the external devices or peripheral devices supports USB 5Gbps, and the USB cable is connected to a USB connector (blue connector) that supports USB 5Gbps).
Connecting Multiple External Devices
This product can be connected to multiple external devices and allows you to switch between the connections for display.
Connection Examples
If two external devices are connected to a single monitor, then the input signals and USB ports can be linked, and the USB device connected to the monitor can be switched using two external devices. For details, see USB Selection – HDMI / DisplayPort / USB-C.
Note
- You can select the input signal to display using the operation switch (
) on the front of the monitor. For details, see Switching Input Signals. - This product provides a function that automatically recognizes the connector through which signals are input, and displays images on the screen accordingly. For details, see Auto Input Detection.
Specifications
LCD Panel
Type | IPS (Anti-Glare) | |
Backlight | LED | |
Size | 24.1" (61.1 cm) | |
Resolution | 1920 dots x 1200 lines | |
Display Size (H x V) | 518.4 mm x 324.0 mm | |
Pixel Pitch | 0.270 mm x 0.270 mm | |
Display Colors | 10-bit color | Approx. 1.07 billion colors (using 10-bit input) |
Viewing Angle (H / V, typical) | 178˚ / 178˚ | |
Brightness (typical) | 410 cd/m2 | |
Contrast Ratio (typical) | 1350:1 | |
Response Time (typical) | Black -> White -> Black | 22 ms |
Middle Tone Area | 19 ms | |
Color Gamut (typical) | 99% of Adobe RGB, 98% of DCI-P3, 81% of Rec2020 | |
Video Signals
Input Terminals | HDMI (supports HDCP 2.3)*2 x 1, DisplayPort (supports HDCP 2.3)*1 x 1, USB-C | |
Digital Scanning Frequency | HDMI | Horizontal: 15 kHz – 76 kHz / Vertical: 23 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) |
DisplayPort | Horizontal: 26 kHz – 76 kHz / Vertical: 23 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) | |
USB-C | Horizontal: 26 kHz – 76 kHz / Vertical: 23 Hz – 61 Hz, 69 Hz – 71 Hz (at 720 x 400) | |
Frame Synchronization Mode | 23.8 Hz – 30.5 Hz, 47.5 Hz – 61.0 Hz | |
Max. Dot Clock | 164 MHz | |
- Supports HDCP 1.3 if "Input Color Format" in the Setting menu is "YUV".
- HDMI CEC (or mutual control) is not supported.
USB
Port | Upstream | USB-C (USB 5Gbps)*1 x 1, USB-B (USB 5Gbps) x 1 |
Downstream | USB-A (USB 5Gbps) x 2, USB-A (USB 2.0) x 2 | |
Standards | USB Specification Revision 3.2, USB Specification Revision 2.0 | |
Communication Speed | 5 Gbps, 480 Mbps, 12 Mbps, 1.5 Mbps | |
Supply Current | Upstream | USB-C (USB 5Gbps): |
Downstream*2 | USB-A (USB 5Gbps): Maximum 900 mA per port | |
- Supports Pin Assignment E. The optional accessory CP200 (USB-C - DisplayPort) can be connected to the DisplayPort output connector of the external device.
- Power will not be supplied if the external device and the monitor are not connected by USB.
Power
Input | 100 – 240 VAC ±10 %, 50 / 60 Hz, 1.50 – 0.65 A |
Maximum Power Consumption | 149 W or less |
Power Save Mode (typical) | 0.3 W (only for DisplayPort input, "Compatibility Mode" : "Off", when not connected to a USB device) |
Standby Mode (typical) | 0.3 W ("Compatibility Mode" : "Off", when not connected to a USB device) |
Physical Specifications
Dimensions | 554.4 mm x 411.2 mm – 556.2 mm x 262.0 mm (W x H x D) (Tilt: 35˚) |
554.4 mm x 396.0 mm – 551.0 mm x 245.0 mm (W x H x D) (Tilt: 0˚) | |
Dimensions (without stand) | 554.4 mm x 362.0 mm x 64.0 mm (W x H x D) |
Net Weight (without monitor hood) | Approx. 8.2 kg |
Net Weight (without stand) | Approx. 5.2 kg |
Height Adjustment Range | 145.0 mm (Tilt: 35˚) / 155.0 mm (Tilt: 0˚) |
Tilt | Up 35˚, down 5˚ |
Swivel | 344˚ |
Vertical Rotation | Right 90˚ |
Operating Environmental Requirements
Temperature | 0˚C – 35˚C |
Humidity | 20 % – 80 % R.H. (no dew condensation) |
Air Pressure | 540 hPa – 1060 hPa |
Transportation / Storage Environmental Requirements
Temperature | -20 ˚C – 60 ˚C |
Humidity | 10 % – 90 % R.H. (no dew condensation) |
Air Pressure | 200 hPa – 1060 hPa |
Accessories
For the latest information about accessories, refer to our web site.