Custom Key Settings

You can assign functions to the custom keys to easily start specified functions.

This chapter describes how to operate the custom keys and how to assign functions to the custom keys.

Basic Operation of the Custom Keys

  1. Touch any switch (except ).
  2. The operation guide appears.
  4. Select or .
  5. The function assigned to or is executed.

Note

  • If you touch a custom key to which no function has been assigned, the menu for assigning a function to that custom key appears.

Assigning a Function to a Custom Key

  1. Touch any switch (except ).
  2. The operation guide appears.
  3. Select .
  4. The Setting menu appears.
  6. Use to select "Preferences", and then select .
  7. The Preferences menu appears.
  9. Use to select "Custom Key", and then select .
  10. The Custom Key menu appears.
  12. Use to select the custom key to which you want to assign a function, and then select .
  13. The menu for assigning a function appears.
  15. Use to select the function that you want to assign, and then select .
  16. That function is assigned to the custom key.
  17. Press several times.
  18. The Setting menu exits.

Functions that can be Assigned to Custom Keys

Function

Description

Off

Disables the custom key.

Brightness

Sets the brightness. See Brightness.

Prev. Color Mode

You can return to the previous color mode. This is convenient for checking the differences between two color modes.

Attention

  • When using ColorNavigator 7, it is necessary to reselect the color mode after exiting the software.

Information

You can view the input signal information and color information.

Note

  • You can check the monitor information under Information on the Setting menu.