Device

IP Camera and DuraVision IP Decoder (IP Decoding Box, IP Monitor) Compatibility

Information about compatibility between IP cameras and DuraVision IP decoders (IP decoding box, IP monitor).

Applicable models

  • IP decoder with system software Ver.6 (DX0212-IP, FDF2712W-IP, FDF2312W-IP)
  • IP decoder with system software Ver.5 (DX0211-IP, FDF2711W-IP)
  • IP decoder with system software Ver.4 (FDF4627W-IP, FDF2304W-IP)

Compatibility

Our IP decoder supports camera's video display, PTZ operation, and setting changes, but the available functions differ depending on the connected camera. Before purchasing, please verify with the actual devices to see if the functions you plan to use will work. Also, since there are differences depending on the IP decoder system software version (Ver.4 to 6), when using multiple versions of the IP decoder, please verify by combining the camera with each version of the IP decoder.

 

Precaution 1
A fatal problem with video display has been found in combination of some cameras and IP decoder with system software Ver.4. This problem is caused by a compatibility issue between the encoding device in the camera and the IP decoder, and there is no solution. If this problem is found in actual device verification, please consider verifying with Ver.5 or Ver.6 IP decoder. Symptom: The display position becomes unstable, such as the display position of the image is switched, or the image is displayed overlapping other images.

Symptom: The display position becomes unstable, such as the display position of the image is switched, or the image is displayed overlapping other images.

Example) The display position of the image is switched and the same camera image is displayed on two screens even though it is not operated.

Cameras recognized to cause the symptom with Ver.4 IP decoder
- Panasonic: X8570, S4150, WV-S15*0 series, WV-S22*0 series, WV-S25*0 series
- ELECOM / DX ANTENNA / DELCATEC: CNE3CPZ1, CNE3CBF1, CNE3CDZ1, CNE3CDF1, CNE3CBZ1

Precaution 2
A problem has been found in the combination of ACTi's analog encoder and EIZO's IP decoder with system software Ver.4 to 6, where the encoder could not be registered, or if it could be registered, the image was not displayed correctly. There is no solution, so it is impossible to display the images from ACTi's analog encoder using EIZO's IP decoder.

■ Incompatible analog encoders
ACTi: V21, V24, V31, V32, V2221, V2224

 

Compatibility Verification Result

This information is provided based on our in-house verification and we do not guarantee the compatibility in respective user environments.
 

IP Decoder System
Software
Compatibility Verfication Result
Panasonic / i-PRO AXIS (VAPIX) ONVIF
DX0212-IP
FDF2712W-IP
FDF2312W-IP
Ver.6 Ver.6 Result
i-PRO
Ver.6 Result
AXIS (VAPIX)
Ver.6 Result
Canon, JVC, MITSUBISHI
DX0211-IP
FDF2711W-IP
Ver.5 Ver.5 Result
i-PRO, Panasonic Integrated Camera, Panasonic i-PRO EXTREME, Panasonic i-PRO SmartHD
Ver.5 Result
AXIS (VAPIX)
Ver.5 Result
AXIS (ONVIF), BOSCH, Canon, Carina, Dallmeier, FUJIFILM, IDIS, IKEGAMI, JVC, MIKAMI, MITSUBISHI, MOBOTIX, SHARP, TOA, VIVOTEK
FDF4627W-IP
FDF2304W-IP
Ver.4 Ver.4 Result
Panasonic Integrated Camera, Panasonic i-PRO EXTREME, Panasonic i-PRO SmartHD
Ver.4 Result
AXIS (VAPIX)
Ver.4 Result
AXIS (ONVIF), BOSCH, Canon, Carina, FLIR, IDIS, JVC, MIKAMI, MOBOTIX, MOXA, Pelco, SHARP, TOA
  • Cameras verified to use H.265:  i-PRO (Ver.6), Panasonic i-PRO EXTREME (Ver.5), AXIS (VAPIX) (Ver.6), Canon (Ver.6), JVC (Ver.6), MITSUBISHI (Ver.6), TOA (Ver.5)
  • PTZ cameras verified to use joystick mode: i-PRO (Ver.6), Panasonic i-PRO EXTREME (Ver.5), AXIS (VAPIX) (Ver.5, 6)